Liebherr SBS 246 Repair

The SBS 246 is a side-by-side refrigerator-freezer, with a refrigerator door and a freezer door standing next to each other, so the SBS 246 has two vertical gaskets meeting in the middle and each door must be checked independently.

Two tall doors

In this layout the freezer is a full-height compartment next to the refrigerator, so cold air passes through a divider and each section depends on its own door seal. A gap on one side may affect only that section, which helps narrow the diagnosis.

What owners report

Typical comments include frost on the freezer side, water pooling beneath the cabinet, a refrigerator that is warm at the top, or a noise that changes when one door is opened. Writing down which door and which shelf is affected is the most useful first step.

Safe checks

Wipe both gaskets, check that each door closes without catching, and clear the vents inside each section. Measure both sides with a separate thermometer. Do not remove interior panels, and do not use tools to remove ice.

How the diagnosis proceeds

The technician checks door fit and seal contact, measures each section, and observes frost and water patterns. If an ice or water function is fitted, it is observed as well. Findings are explained, and a written estimate is provided before any repair is begun.

Rating plate and service number

Before contacting anyone about the SBS 246, copy the full model name and the service number from the rating plate inside the cabinet. The documentation tied to those numbers decides how any display code or setting is read, and a code taken from a different Liebherr model should not be assumed to carry over to the SBS 246.

Local installation notes

Mention where the SBS 246 stands in the home, how old the installation is, and whether the cabinet has been moved or the kitchen altered since it was fitted. In older Bay Area buildings these circumstances explain a surprising share of temperature complaints about the SBS 246.

Observations specific to this model

The SBS 246 has a refrigerator door and a freezer door, so every observation about the SBS 246 should say which side it refers to. If a problem on the SBS 246 affects only one door, the seal and hinge on that side are checked before the shared cooling is considered, and any water or ice function is observed on its own.

If the SBS 246 has an ice or water function on the freezer door, say whether it is still working, because that information separates a problem with the door itself from a problem with the cooling behind it.

Frequently asked questions